PRODUCTS CENTER
Kuwait Pasteurization system
Category:
KuwaitPasteurization System
Product Description
Brief Introduction:
The pasteurization system consists of a 2 or 3 sections plate heat exchanger and a retention pipe bundle. The plate heater and cooler shall be a combined type plate heat exchangers of suitable gasket materials and SS316L plates.
An optional heat recovery section for the outgoing hot and income cold oils can be added for energy saving. The heating and cooling are controlled by PID loops with Spirax Sarco regulation valves. Flow divert valve to regulate flow either forward to chiller or back to production tanks. Sufficient length of retention pipe will be provided to meet the local holding time requirements. All wetted materials are of SS316L and food grade elastomer.
It is based on tubular heat exchange and combined with theworking principle of SSHE.With the help of cylinder's evensliding movement and instant cleaning of the exchangingsurface,it makes its heat exchange efficiency can reach 2~3times oftubular heat exchange.
This equipmentis most suitable for soy sauce,oyster sauceseafood sauce,soy products, dairy products,liquid cosmetics.and the material with low viscosity.
Specifications:
| Serial number | Product model | Heat exchange area (M2) | Pressure | Texture of material | Effective length (mm) | Mounting dimensions (mm) | Installation mode | |
| 1 | A2-20-76 | 0.48 | Material layer | 1.0MPa | SUS304、 SUS316L | 2000 | 2500 | horizontal, vertical |
| Dielectric layer | 1.0MPa | |||||||
| 2 | A2-20-108 | 0.68 | Material layer | 1.0MPa | SUS304、 SUS316L | 2000 | 2500 | horizontal, vertical |
| Dielectric layer | 1.0MPa | |||||||
| 3 | A2-30-76 | 0.72 | Material layer | 1.0MPa | SUS304、 SUS316L | 3000 | 3600 | horizontal, vertical |
| Dielectric layer | 1.0MPa | |||||||
| 4 | A2-30-108 | 1.02 | Material layer | 1.0MPa | SUS304、 SUS316L | 3000 | 3600 | horizontal, vertical |
| Dielectric layer | 1.0MPa | |||||||




: next